DTC C0063-F0: Yaw Rate Sensor Malfunction
NOTE: Before you troubleshoot, review the general troubleshooting information.
SRS unit check:
‐1. Turn the vehicle to the OFF (LOCK) mode.
‐3. Turn the vehicle to the ON mode.
‐4. Clear the DTC with the HDS.
‐5. Turn the vehicle to the OFF (LOCK) mode.
‐6. Test-drive the vehicle under these conditions:
*Vehicle speed at 50 km/h (31 mph) or more for 10 seconds or more.
*Change lanes a few times.
NOTE: Drive the vehicle on the road, not on a lift.
‐7. Check for DTCs with the HDS.
Is DTC C0063-F0 indicated?
Check for loose terminals and poor connections in the adaptive damper control unit 24P connector. Check for any authorized service information related to the DTCs or symptoms you are troubleshooting. If they are OK, replace the adaptive damper control unit.